Local Storage seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Local Storage in your browser.
CR Clarke Vacuum Former Model 1820
£10,869.00
Web Code
MP520
QTY:
Over 200 in stock
CR Clarke Vacuum Former Model 1820. Each
Features include:
• Maximum forming aperture: 432 x 482mm
• Sheet size: 458 x 508mm
• Maximum material thickness: 6-8mm
• Maximum mould height: 280mm
• 4 individual heat zones
• Heat resistant moulded RTV silicone seals
• Inverse wiring system gives precise control of heat emission
• Roll feed & timer controlled fans
• Blow release
• Mechanical interlock prevents moulds damaging heaters
Specifications:
• Voltage: 220-240V, 50-60Hz
• Motor: 1ph (230V), 4kW
• Heater: 230/115V, 4kW
• maximum current: 12.26-14.16A
• Platen stroke: 305mm
• Vacuum pulling capacity (typical): 635mm Hg (0.83 bar)
• Dimensions: 1,160 x 840 x 1,420mm (H x W x D)
• Weight: 174kg
• Supplied with a single phase plug as standard. Please call if you'd prefer a three phase option
• Maximum forming aperture: 432 x 482mm
• Sheet size: 458 x 508mm
• Maximum material thickness: 6-8mm
• Maximum mould height: 280mm
• 4 individual heat zones
• Heat resistant moulded RTV silicone seals
• Inverse wiring system gives precise control of heat emission
• Roll feed & timer controlled fans
• Blow release
• Mechanical interlock prevents moulds damaging heaters
Specifications:
• Voltage: 220-240V, 50-60Hz
• Motor: 1ph (230V), 4kW
• Heater: 230/115V, 4kW
• maximum current: 12.26-14.16A
• Platen stroke: 305mm
• Vacuum pulling capacity (typical): 635mm Hg (0.83 bar)
• Dimensions: 1,160 x 840 x 1,420mm (H x W x D)
• Weight: 174kg
• Supplied with a single phase plug as standard. Please call if you'd prefer a three phase option
| Web Price | £10,869.00 |
|---|---|
| Web Code | MP520 |
| Alternative Codes | MP520, 319618 |
| Catalogue Page Number | 930 |
| Brand | CR Clarke |
| Pack Size | Each |
| Pack Size | Each |
| GTIN | 5028288218110 |
This product is classified as an 'article' and therefore by law does not require a safety data sheet under current legislation.